2011/03/16 15:43:50
Luke
Has anyone got the sizes for the tubes and bolts needed to convert the front crossmember to bolt through the chassis rails. Im not near the car so cant measure.
Cheers
2011/03/16 16:02:53
ash
The tube needs to be about 80mm long, so get 100 to be safe (each), and use a 12mm bolt (x 125mm). Make sure the tube has a decent wall thickness.
2011/03/16 17:36:13
viskoe
Ive used 1/2' OD, After its welded in I run a drill bit through it to ream it a Bit.
I am using 10 mm Bolts and nylocs


I will have some spare tube if you need it.
Rgds
Emil
2011/03/16 22:29:59
Luke
Cheers for the help Ash and Viskoe . Viskoe where abouts are you?

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account