quote:

---

Originally posted by maxrs

Did you buy the heater from Rocket industries Phil?

---

Hi Mark,

It came from Jayair

quote:

---

Originally posted by mud

What an interesting idea, keen to see how it turns out Phil.

---

With 2 of them side by side they should punch out some heat[%] I will get some pics over the weekend as I fit them up

The heaters look interesting. What sort of amperage do they draw from 12V?

Hi Timmeh,

They draw 25 amps. I did the install today,after testing,only one was required which is good as 50 amps is a more than I'd like

Anyone for a 12v heater[%]

I finished the heater box build today...only ended up needing the one heating element I made up a virtual heater core out of some flat aluminium plate which has a 90mm x 90mm hole cut in it for the air to travel through and also holds the relay. The whole thing slips in to where the heater core would normally go, this will be the same for Escorts and Capri's The heating is spot on and works a treat[:p]

I also finished the brake lines today and bled up the brakes

I also scored some NOS c pillar vents

Hope your heater box gets a detail

A little masking tape and some satin black works wonders[;^)]

I got a little bit of trim done today Both the under dash shelves are trimmed along with the kick panels and inner sill covers. Once I finish putting the shelves and kick panels in there's a body colour fascia that goes right across the car following the shelf line to fit up as well. I cant wait to see how it looks...its been many years since any plush trim resided in the old girl[(#)]