The last link there says $51? Way too much, check this one.
 
http://www.ebay.com.au/it...mp;hash=item41646e2214
 
LEDs have a naturally wide spread too, usually about 140 degrees so I dont think you would need the side LEDs on these units...
 
Cheers,
 
Rob

Robmk2

The last link there says $51? Way too much, check this one.

http://www.ebay.com.au/it...mp;hash=item41646e2214

Yeah, the price got changed since I posted the link several weeks ago; it was only a buck or two if I remember correctly.  My guess is that it is a listing mistake seeing there are tons of sellers for these.

Hey guys,
 
Sorry to revive an old thread but I'm wondering if anyone has any guides or something on how to change the lights in the dash cluster x.x

Pretty straightforward, just grab some LEDs from the last ebay link for $1, pull the cluster out and replace with the LEDs... Mine are still going well but I'd grab a couple of spares since the ebay LEDs can be really cheap quality sometimes...

Or for convenience sake, buy a pair from SCA. $6.99

I totally forgot about this forum and post haha.
 
So I've put the lights in and they're all working but when they're back in there is a couple of dull spots on the speedo and you can't see 80 but everything else lights up reasonably well haha. I should post pictures of my car on here one day.

i bought a whole bunch off ebay for about $10. The ones with about 7 small LED's on the t10 fitting itself.
 
When hunting through ebay, T10 is the fitting you need.
 
this thread -> http://www.classic-ford.org/cfp/tm.aspx?m=62123 has a few good reference photos.
 
Dave