Finished the pushrod for mounting the M/C to the firewall.
 
The MK2 pushrod was too thick so I used one from a MKI (big thanks to HAK073).  It needed to be cut down to 190mm and the end thinned down with the angle grinder to fit into the M/C.
 
The fit is excellent and there is only about 3mm play in the pedal before it pushes on the M/C.
 
Here's a few pics.
 
Cheers
 
Matt 
 

Few more
 
Matt
 

I got a full standard exhaust system from Whooligan so once that's in I can get it back to the mechanic for the roadie then drive it finally.
 
Cheers,
 
Matt
 
 

Hey matt - nice work.
Love the carbies, what an awesome idea.
Love to get a set of those alloy hubs when i have some spare change. are they really light?
Daz.

looking good matt, shame you couldnt use the pushrod i gave ya.

Hey Daz,
Yes, they are a lot lighter than the standard ones and push the track out about 10mm per side too.  Plus they look the dogs balls!
Here is the link - http://www.motorsport-tools.com/escort-grp4-rix-engineering-alloy-front-wheel-hub-large-bearing-standard-studs-p-268405.html
I highly recommend Motorsport-tools.com.  Rhys is a great guy and their customer service is awesome,  The hub bearing caps were not a great fit (would fall out if held upside down) so they got new ones in and posted them to me for free. 
Not many aussie guys use the bike carbs but in the UK it's very popular as webbers are getting very expensive these days. 
 
Ez', As i guessed the thickness of the firewall I may still need it yet. 
 
Cheers,
 
Matt 
 

I dont have 10mm track to play with :-(
Got my tca's from motorsport-tools.
Nice work on the brakes. I tried to get the H/Brake linkage but no one had one. so i had to make one. Shoulda tried harder i guess.
Looks awesome - good work.
 

Got the RDA 101S Vented Rotors today and fitted them to the alloy hubs.
 
Thanks to Wozzah for the locating rings.
 
Few pics
 
Cheers
 
Matt
 




 
 

Took the car in today to get a Roadie and all that was wrong was it needed a new steering rack bush.
 
Have sorted out a Quick Rack thanks to Whooligan.
 
Having it fitted on Monday so all should be good to go and on Club Plates by Months end.
 
Woo Hoo!
 
Matt 

Good news Matt.
Now go do some weeding :-p