i have built myself a pinto for my escort but am no longer considering putting it into my car,
i would like to know of interest and a possible price people would offer to pay for it? i am a mechanic and i can get reciepts for the machine work

this is a small list of the work done:-
- 100 thou oversized bore and pistons
- flat top pistons
- fully rebuilt bottom end
- decked
- head has been shaved
- ported
- stage 2 mild cam
- new valves/springs
- new cam lobes
- ford twin barrel weber
- new water pump

any questions dont hesitate to ask

100 thou oversize?  Really??

New cam lobes

Whats the stroke on the crankshaft
 

100 thou really!! It's even written on top of the pistons.
My mistake, rockers not cam lobes woops

how much would you be after mate?

harbo_11

100 thou really!! It's even written on top of the pistons.
My mistake, rockers not cam lobes woops

 
More likely to be 1.00, as in 1.00mm which is .040" over.  Any .100" over piston would be a custom made jobby and highly unlikely to have anything on the top of the piston at all.
 
Woz

Guaranteed that it is 100 thou over size there is no decimal, because Ive already been through this with other mechanics and have proven them wrong, if needed I could get a picture

As for how much, I have no idea,make an offer

harbo_11

Guaranteed that it is 100 thou over size there is no decimal, because Ive already been through this with other mechanics and have proven them wrong, if needed I could get a picture

As for how much, I have no idea,make an offer

 
Can you measure the bore size for me please to confirm,
 
Cheers
Woz

I can not remove the head as head gaskets are single use! I will post some pics of the engine and some pictures I took of the piston tops with a fibreoptic camera, am in the process of aquiring receipts from the machinist