hey guys,
 
need to do a zetec engine test fit into my mk2 escort. This means firstly bolting the standard x-member back to the chassis. Anyone have any details on what bolts are used to do this? Any input appreciated...
 
//lee
 

Use the orig bolts that came from there..mk2 bolts are 30mm long as to mk1 bolts being about 20mm . Both are a unf fine thread similar to pinion flange bolts . If ur real keen drill right thru the nutsert and thru the top of the chassis , fit crush tubes and high tensile bolts. ..Much stronger.

thanks for the reply marty... I should have clarified in my first post (as there will probably be a few of these questions) i bought my escort fully stripped. this of course means i have a pile of bolts and no way of knowing which is for what. even more challenging at the moment is the shell is at the body shop so trying to avoid a lot of backward/forward trips working out whats what... 
 
so for the xmember they are 30mm long UNF fine thread bolts. that is a good start...