Phil, what company are you using to get them cut, as I am needing a exhaust flange cut and lasermade wants $250.

No problem Guys. I confirmed today the material that will be used is 5083.
 
Nigel, with the numbers here I'll get one cut, but some one who is after just one might grab your spare?
 
Luke, 14mm should be fine, I've only ever used and known 16mm spacers to be used, and seen good power with them so just sticking with what I have used. 
 
Fehlbie, Aquacut at Ingleburn is doing the job. Lasermade were one of the dearest ones for these too, Im pretty sure they were quoting $250 a piece. Do you have drawings? I can drop them in for a quote. I also have your K&N filter:)
 
I've got to pay for them when I place the order so if you guys can shoot me a pm I will reply with my account details.
 
Cheers,
 
Phil.

Thats rich Fehlbie. I only recently had 2 of YB exhaust flange, T3 inlet and outlet cut in Perth for $65 from 10mm steel (which they supplied).
 
Ash

That was with me supplying the stainless steel plate too.

Phil

No problem Guys. I confirmed today the material that will be used is 5083.

Nigel, with the numbers here I'll get one cut, but some one who is after just one might grab your spare?

Luke, 14mm should be fine, I've only ever used and known 16mm spacers to be used, and seen good power with them so just sticking with what I have used. 

Fehlbie, Aquacut at Ingleburn is doing the job. Lasermade were one of the dearest ones for these too, Im pretty sure they were quoting $250 a piece. Do you have drawings? I can drop them in for a quote. I also have your K&N filter:)

I've got to pay for them when I place the order so if you guys can shoot me a pm I will reply with my account details.

Cheers,

Phil.

 
Thanks Phil. I will give them the drawing once I have finished it and get them to quote.

ash

Thats rich Fehlbie. I only recently had 2 of YB exhaust flange, T3 inlet and outlet cut in Perth for $65 from 10mm steel (which they supplied).

Ash

Who did that work for you Ash?

Lasercut in bayswater (13 kattanning st). The guy I spoke to used to have an escort, so that's always handy. His name was Shannon and he did the drawings.

By the way, that was mild steel not stainless.

Phil,

Have your account details changed in the past 12 months?

Hi Ash,
No, still the same.
Cheers,
Phil.

Hi Guys,
Just a reminder, Im placing the order on Wednesday.
Regards,
Phil.

6 Spacers are now ordered and should be ready early next week:)
Cheers,
Phil.