2011/08/11 18:21:30
camo91
Im going to be moving my battery into my boot and i want to know what size (amp) Should i use???
 
thanks
2011/08/11 21:43:35
Matt75
I use 200amp cable.
 
Just make sure that you get a really good earth from the battery to the body as a common starting issue after doing this conversion is a poor connection.
 
I  have even earthed the block in 2 places as well.
 
Cheers,
 
Matt
2011/08/11 22:52:04
spigot
Get welding cable, 25mm minimum.
2011/08/11 23:15:18
JamesR
i used arc welder earth wire.
its about a 10mm inner core dia, half inch outer.
also have multiple earths on engine, and a  670cca battery.
2011/08/12 11:44:05
spigot
25mm^2  cables are generally rated in cross section not diameter.  The seppos like to use gauge which is diameter based I believe.

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account