Hi all
 
Just wondering if anyone has had the same drama. I have a pedal box with the dash adjuster setup that screws over the end of the bias bar. While i have been trying to set the bias im finding i cant get the screw on end tight enough as when i turn it after full lock it basically unscrews off the bias bar!
 
Have i dont something wrong there, or do i simply need something like a lock nut on the bias bar first and lock it up to the dash adjuster??
 
Cheers
Matty

My adjuster cable is retained in the balance bar by a grub screw. You must be running a different setup??
I haven't experienced any issues with mine whatsoever .

Could a bit of loctite be of assistance?or a locknut like you mentioned.

this is the one i have, the grub screw seems to only attach to the cable..
 

MATTJ
the grub screw seems to only attach to the cable.. 

.....and what's the issue with that?

Does the cable slip inside the balance bar?

Cheers