Hi all has aynone got any maps there willing to share?
Im running autronic smc.
Phil, Mark

I'll see what I can dig up...although unless your running the exact same spec, they wont be close to what you need, and I definately wouldnt trust them for anything more than initial start up.
Its probably better to write a map from scratch to suit your injectors and spec for start up.

My Tuner just asked to see if  I could get one to help ease the cost of dyno time.
I will be greatful for anything you have to offer Phil.
Cheers
 

Whats the spec(sensors,trigger types,injectors,etc), I will look through what I have for something close to what you need.

Its all factory sensors with the dizzy having 1 lug removed and delphi 1000cc injectors with a turbo close to a GT3076. Will be running msd cdi also.
Anything else you need?

Which MSD Cdi are you using? 4 coils, wasted spark or single?

What software version and which 1000cc injectors?

The msd is a 6al from memory but not the digital one.
Im not sure of the software Phil, I will have to get back to you.
Its not actually wired up Phil thats happening in Feb, what coil setup would you suggest?
Cheers mate.

Wiring isnt a problem but the set up of the software will be if it isnt correct to what you have. What type of injectors are you using? I have a 1000cc injector map here but it will need tweeks to be ready to start yours. I can set it up before I send it if I have all the details. Once I have the software version and injector details that is pretty much enough to do the rest of the set up. The only thing remaining will be to get the cyl/sync ref phased in correctly, but thats easy once its ready to start.

Just to make sure, you are reffering to the ecu software right.
Is there anyway to find out without powering it up?