Anybody know of any MkII Escort wrecks being parted out in Perth?  I need a couple of bits and pieces that would be awkward to post.
 
Thanks.

List up what your chasing
I might have a few bits  that I dont need.
 

mate i have a few parts what are you after?

For starters, the brake line from the master cylinder to the driver's side front wheel.  I've been led to believe that there are two different types of cylinders used, mine being a '78 model 2.0 that has 3 separate lines; two from the side and one from the bottom.  It's the one from the bottom front of the cylinder that I am after.

If I could jump in and ask if anyone has a 2L drop tank in un-dented condition? Cheers

As this seems to be getting into swing, im also looking for the following bits in Perth:
 
*fuel sender unit
*2 electrical brass insert pins from the wire clusters that plug into the back of the dash (upgrading to a a tacho dash atm)
* driver's side armrest
*decent 13' rims
*2 ltr struts

Looks like we need to organise a local swap meet!
 

the_cheese
*decent 13' rims

What width/style did you have in mind?

I can help with:
 
a) 2L fuel sender;  #1 is on my car currently - works but a full tank shows only 1/2 full on gauge.  #2 is unknown quantity off a wreck but looks to be in good condition. Your choice - $60 for either
b) 4x 13x6.5" Trident / Jellybean rims with 10yr old 185x65 tyres all same brand but various condition.  Deep dish rims - $120 the lot
c) 2L struts have been modified to give 3-4 degrees of camber with std strut tops.  Were used Targa Tasmania 1996 - $120 for pair.  I dont think they have springs or inserts
 
Other things:
32/36 weber on ported manifold set up on dyno to suit inj head
Complete axle and diff assembly 3.77 ratio came off a low km 1600 auto so its had easy life
Several aftermarket cams - all sort of FR32ish grinds incl matching rockers
Fully assembled by Rolly Waters head with FR32 cam (I think head is std but not sure)
Alloy rocker cover
Couple of dead 2L bottom ends incl sump and pickup
38/38 DGMS weber carby
Seatbelts
Fibreglass Mk2 rear spoiler looks identical to std rubber version
 

PM sent