I Thort I was the only clown to fit 4x4 tyres under escort guards, these are Golf mk1 flares. .!

Lol, mine fit better than yours....

WHO NEEDS FLARES/ ARCHES? Might have a slight problem with rego!!

hi matt who building your engine and what hp figures are you after cheers mario.

mario
hi matt who building your engine and what hp figures are you after cheers mario.

Hi Mate, Wazza on here is building it for me. He's done a number of mates race engines that have seen lots of hours with great reliability. Aiming for around the 190hp mark but as these numbers are subjective (dependant on many factors) I'm chasing mid-range torque over top end hp.

Cheers

Matt

hi matt wazza does great work who supply you your kent cam kit as im after a kent cam , what cam are you using cheers mario.

mario
hi matt wazza does great work who supply you your kent cam kit as im after a kent cam , what cam are you using cheers mario.

Hey Mate, running a Wade 520x cam that Wazza has tweaked a bit.

Go direct to Kent or through Burtons

Cheers

Matt

Bit of an update. 

Here is the infill we did for the tubs
 

 
Then we started looking for rust and have found lots
 

 
Repaired the drivers side footwell
 

 
Grinding and finding rust and bog.....soo much bog
 

 
 

Few more things 

Had to cut holes in the roof to get at the roll cage to finish off welding it 
 

 
Onto the front where we cleaned up the front panel