Hi Guys,
 
Im as per previous posts, im now putting the engine back into my RS2000, and I seem to be having trouble with identification of the gearbox bolts.
 
I was sure I had the right ones marked, but there doesn't seem to be the right number of them!.
 
Does anyone have any reference information (photos would be awesome!), of which bolts are the gearbox bolts, and which ones go where. Are all gearbox bolts the same length (with the exception of the two right down the bottom of the box?)
 
Any information anyone can provide would be greatly appreciated. I cant move forward until I get these right!.
 
Cheers
 
Dave
 

Are you talking bellhousing to block?  If so then from factory there were 2 with 17mm heads at the top and 4 with 13mm heads plus the starter bolts.  The 13mm headed bolts have long and short, long for the 2 spots at the bottom of the block and the short ones for everywhere else including the starter

Thanks very much for that gdub. Great info. Much appreciated.
 
Dave