Hi all,
           as the title says Im after a master cylinder. The better condition its in , the better for me. Im trying to get a brand newie but its a tough ask! So Ill probably have to get a used one resleeved. I think for memory the bore size is 19.05mm.
   Im in Wollongong but will pay for postage for the right item.
       Cheers
         Shep

I've got this one sitting in the shed.

I got it for my mk1, but the thread sizes for the pipes were too big, so I assumed it was a mk2 one (edit: the receipt says its a "3/4 Escort No Booster" So not sure if its the right one.
I paid $150 for it a year or so ago from Burt Brothers in Sydney. But if you chuck me $100 plus whatever postage costs that would be cool. I'm down near Nowra if that helps any.
Cheers, Pete.

Hi Mick,
I had that reconditioned by Hi tech brake & clutch  here in Windsor with the booster at the same time,
Jim

Hi, Shep
mk2 cyl Reco, &  c/over required,  $295inc gst +postage
03 9761 4714. … hope this helps

Thanks for the replies guys.
 Hak073, not sure if its the same as mine mate.
    Hey Jim , did they look at the disks and pads?  If they did the master cyl and booster maybe it just needs new pads and disk machine. I really want to get the brakes nice and strong. I know they're only escort brakes but I reckon it should have better stopping power and feel. Got the new carby fitted, plus ran choke cable where the factory choke cable mount is in the dash, pretty easy setup and it runs really well, just need to get the tuning setup on a dyno.