I think its pretty straight forward Mark,but agree its a little drawn out.
 
I get that english is probably Anna's second language, but as they are manufacturing the bars made to order, I'm guessing you can have basically whatever they can make.
I could be wrong, but I feel confident Anna is likely to make what I'm after: 1 full rear Capri bar with a single reversing light hole, 1 pair  of Capri  front bumperettes without indicator cutouts, and no mounting holes drilled. Im ok with drilling the mounting holes, just incase the spacing isnt right.Its stainless so no drama.
Annas going to post up photos once made,before sending and payment so whats the risk?
Just make your wish and it may be granted? 
 
time will tell but nothing ventured....

Yes Deano, I meant no offense (to Anna) its just a bit tiresome watching this drag on.
In the end did we have any evidence of these bars standing the test of time. Apart from their actual build quality and conformity to the originals?
I work with primarily with stainless, alloys and derivatives thereof. So am wary of products which come untested.
Mark

Sorry maybe my english is not good 

 
Dear Mr Deano
Thank you very much.
Please take a look at the picture. Your customized bumper will look like the picture, right?
If the bumper sends you problems we will compensate you.
I'm a bit verbose because I want to do exactly what the customer wants
so I don't want to make mistakes
Best regard
Ms Anna
Facebook: Anna Anna Ptt Bumper
Email:ptt-anna@sgbumperscar.com
Line or WhatsApp:  +84962709762

Dear Mr Deano 
Please see the pictures

Dear Mr Mark,
Please rest assured our bumper is made of stainless steel.
As you can see in the image, I'm advertising .. 2 front bumper will cut the light holes.
The rear bumper can be made with a 5 angled hole or 2 holes for the number plate lighting.
But by customers' request. just like Mr RJ required not to cut out the lamp opening of the front bumper.
so I just wanted to ask in order to be able to send it as per your request.
About the shipping part can you provide me the specific address?
You can send me via email or facebook or on whatsapp. If you don't mind you can send on above. I will check for you
Looking forward to hearing from you
Best regard
Anna
 

Hi Anna,
I am happy, please go ahead.
Can you please supply stainless or chrome mounting bolts to match if you have them.
 
thanks
Dean

Dear Mr Dean
Yes, I will send  bolts and nuts to you
Best regard

Hello Anna, 
I sent you an email with my photos/measurements for drilling the rear bumper.  I may have a problem in that the US spec bumper required a rectangular plate emerging from each frame rail.  Does anyone have a photo of the rear bumper mounting hardware for an Australian or British Mark 1? 
‘I’ll take the front quarters undrilled, without side marker cutouts to follow Deano’s lead and self drill the fronts.  
please send me pricing in USD. thanks,
RJ 

RJ from memory our rear irons are just simple flat bent bars, with no "plate additions"', so could be different from what the US spec is you are descibing. Same scenario with our fronts.
Others may have a better idea.
If I get time, I'll take the rear bar off and get some photos this weekend (has to come off anyway).

Are these what he's asking a picture of?