Hi I'm new to this, anyone know where I can buy the brackets to fit r31 calipers to an English axle? Cheers

Paul Dunstan is your man.
http://www.classic-ford.org/cfp/Profile/29/

Thanks heaps

Can't seem to get in contact with him, does he have a Facebook page or a contact number ?

Send him a PM

Because I'm new it's not letting me

Hi Gezza. You have PM.

Thanks EVOBDA2 👍

Can someone point me in the right direction. Want to do this. Have no idea what needs to happen or what is needed? Thanks. :)

- From memory you use the Audi 90 disc rotor (DBA445) and need to ream it out slightly larger just to fit over the axle flange. Standard 4x108pcd will fit.
- Bracket bolts on to diff casing, calliper bolts to bracket. 
- You will need a cable handbrake setup either from a R31/Pintara etc or make a custom one up.
- And of course hydraulic lines which are pretty standard, but keep in mind it is a floating calliper design so you need flexible lines (for the final connection to the calliper anyway).
 
Thinks thats basically it if others want to add/correct me..