2010/01/10 20:32:53
tex_f
g'day paul, was looking at getting a kit
how much am i looking at and as arron asked what model cars should we source these partas from?
Only if you are planning on getting some done already of course.
Thanks.
Ben.
2010/01/10 22:04:30
Paul Dunstan
Hi All.

Aaron - rear rotors (DBA445 or RDA445) from a late 80's Audi 80, 90, 100 and even the Quattro 80. Best to have a gander at the DBA website and browse the catalogue . I believe DBA no longer produce this rotor but the RDA unit is available.

Tex_f - I will probably be producing a few more kits soon if you're interested.

Anyone else?
2010/11/16 00:50:28
Diskonekted
Hi Paul,

I know that this has been mentioned before (regarding longer wheel nuts), but in the photos, the stud length doesn't seem very long. In my case, I've got 13" Vilante Rims that came on the Rallye Pack Escorts and by judging the length, I don't think these would come into the rim by a quarter.

Have you had any problems with this? Also, I couldn't find anything aobut the handbrake setup, but saw a post on Ebay (perhaps yours) which mentioned that parts can be taken off the R31 diff to hook up the handbrake, just wondering if you know which parts?

Cheers,
Drew.

PS: Very keen to get a kit.....
2010/11/16 10:04:10
Paul Dunstan
Hi Drew

Longer wheel studs may be required with alloy rims although steel wheels might be OK. I will be installing longer wheel studs to ensure I have ample length with my rims (Simmons).

When you grab your callipers also take the hand brake cable and brackets (which unbolt) from under the car. It's not rocket science to then adapt this to the tunnel of the Escort and the hand brake lever.

Here's a link with the R31 set-up on a LJ Torana http://www.gmh-Torana.com.au/forums/index.php?showtopic=29806
2011/04/18 16:49:57
Paul Dunstan
Guys

5 more kits ready.

This will more than likely be the last batch so if you're wanting a set let me know ASAP.

Cheers
2011/04/18 22:48:00
the_cheese
Hi Paul,

I would like a set, please!

Struggling with mobile internet atm - I will PM you later today.

Cheers

Nick
2012/05/27 15:35:59
retroracer69
Hi. Can I please purchase the rear caliper bracket set up for the R31 calipers and Audi rotors onto my MK1 with 13' Superlites. Would you pefer money order or direct deposit. cheers JD
2012/05/27 19:45:21
Paul Dunstan
I currently have none available and i will get some more underway ASAP.
Bank deposit is no worries.
2012/05/28 09:26:04
retroracer69
Thanks Paul .... don't mean to pressure but any ETA on that? Cheers
2012/06/03 14:44:46
Paul Dunstan
Probaly 3 to 4 weeks at this stage as I have a lot going on at the moment.
 
Hope that's OK?
<< ..78.. >> - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account