Hi i'm looking for some 7/16 unf bolts with 12mm shoulder. Are these available in oz? I've been to three fastner shops today. No one has them.
There's some in the UK but are longer to suit vented discs. I'm going to run solids. Would it be acceptable to use these with the washer under the bolt head instead of using it as a spacer?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130835499754&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
 
I found a page where they used 12mm bolt with shoulder then reduced the thread from 12mm to 7/16 with a die set
http://www.cjw-consulting.co.uk/4pots/4pots.htm
Any help would be great thanks

I bought mine from here if that helps - http://www.australianboltsuppliers.com.au/bolts/
 
Cheers
 
Matt

Awesome. I'll give them a call tomorrow. Thanks Matt

No Stress,
 
I remember taking in my cap;ri struts and just saying have you got a bolt to fit this.  Not the best service but they had what i was after.
 
Cheers,
 
Matt

I had a chat with David at Australian Bolt suppliers. No cigar

Found at last. Seems 7/16 UNF with 12mm shank is non existent here in oz. Thank goodness for ebay UK.
 
http://www.ebay.com.au/itm/300748518699?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

That seller in particular has heaps of useful bolts nuts and spacers for classic fords!