As per above I have a set of 13x8 Rebels that I want to swap for a set of 13x7 or smaller.
 
They are too wide for me as I have rear disks and the front hubs are 10mm wider than standard and the car is quite low.
 
These would be perfect for a standard height escort or if you have flares.
 
Cheers
 
Matt
 
 

Hi Matt, I have some neat 7 inch Hotwires, I can do.
Let me know.

Thanks mate, I'll keep it in mind but I am really after another set of rebels.
 
Cheers,
 
Matt 

Sorry my bad, Let me know if you want to sell them either way. Maybe cash your way plus the hotwires?

Try Carl  (03) 9808 6777 he has a few sts of rebels

Did you read my post on TS re mk 1 cortina diff?

I wasn't aware that there were 13 X 8's available??
Sure they are not 13 X 7's (same width as the deep dished hotwires)?

Hey Sean, no I didn't.  What's the link?  
 
It turns out they are 7" rims as I measured them inside edge to outside edge and got 8" whereas they should be measured from the inner edges.  
 
I will look into getting them machined and then see how I go.
 
Cheers,
 
Matt

"I will look into getting them machined and then see how I go."
 
Which part of the wheel are you planning on machining?
 
 

I've got a spare mk1 cortina diff here with machined axles to suit Alfa discs if you want to try out for width.

Narrower than the escort. I'm running one with discs and 8.5" rims under standard but rolled arches.

Shaun.