Hey guys, what year/model tx3 front rotors are best with the m16 spacer kit? This is a straight bolt on conversion isn't it?
 
CheersBrad
 not sure it matters but she's a mk1 with a mk2 2.0lt front end.

RDA 101s is what I've used with my volvo caliper conversion if that helps
 
Matt

Cool thanks checked out the website, Aussie company and my be able to get blanks or at least get them to do the pcd that I'm after ill give them a buzz tomorrow

The TX3 rotor is 13mm larger in diameter than a Capri/Escort rotor, so will the caliper getting over it?

There are a few threads on here that cover this conversion, my understanding is that they are 260mm one member had them turned down to 257mm same as standard m16 but in the end thought it probably wasn't needed. The other thing is the hole in the middle I think it needs to be 55mm, not sure about the tx3 ones MAYBE I can get new ones the same spec as Capri 2.8i hopefully   

Do yu mean 247mm !
I've installed bmw e38 rotors on my Anglia they're 260x22 and only need a tiny file where the holes bolt them on .still fit behind 13in rims. .

Escort discs are 247mm diamter with a 68mm centre hole, whereas the TX3 are 260mm diameter with a 75mm hole

Yeah ment 247mm my bad what are the Capri 2.8i rotor dimensions?
Marty was that with m16's?
 

2.8i are 247x 18 i think.... so long since i bought a set.
You can fit the volvo 4pot calipers quite easily tho I'm not sure about m16 . My Anglia will have Wilwood NDL 4pots