Sounds like you need to borrow a lower trailer next time!
 
The car is looking great as always!
 
 
 
 

Good to see you using it for what it was designed for!!! Looks like the car ran well :)

Thanks guys for the kind words.
I figure there is no point in owning it if your not going to drive it.
 
 
I have also added some more photos in the photos section.

Fahley

Im preping the car for the up coming Targa South West.
http://www.targasouthwest.com.au/ this is run on the 25-26th of May.  Is the fisrt tarmac rally event i have entered. As i dont have a roll cage yet the regs limit my speed to 130km/h. I guess fast enough on wood lined roads without a cage. I figure the next purchase will be a cage. I have been trying to keep it a road car but i think i have finally hit the cross roads. Anyway there were a few thing that need to be done after the preliminary scrutineering, thanks to Ivan at Go Gear in Perth.
I had to close off the rear fire wall.


I also removed all the interior and flat blacked it all out. Fitted new rear wheel bearings and disc brakes and fitted some newly purchase goodies in the cockpit.



I also took it to the shop to get it tuned up. This is the first time i have paid for anything to be done the the car. I had to get a new manifold as the old unit was doing me any favours with the 45's. All good now with a few extra horse power for the trouble.
 
 
 

The cars coming on nicely Ian. If you ever need a hand at the rallys I would be glad to help.

Thanks Luke.
Might take you up on that one day. I get up to yours next time home. This car has been keeping me real busy for the couple of weeks. a new baby hasnt helped either with available time.
 
Fahley

Do you have the correct wheel nuts for that spare falcon rim? They require both shank and taper. I have some to fit that exact rim if you need.

Hi mate,
 
Im not sure exactly what you mean but i have some 1 1/4" long open ended wheel nuts to fix the wheels.

They should have a tapered edge and a shank so the wheel doesn't slop around.
 

Wow, I hope not as they are nothing like im using. My wheels have tapers seats fitted in the wheels themselves.
 
Touch wood they havent fallen off yet.