Hi guys, I'm doing the black metal interior trim that runs over the A pillar / B pillar / top rear curved glass / inside top of door around window frame etc for a Capri black GT interior. Is the black colour, Gloss / Satin / Matt? Wanted to be sure before I paint it. 
 Thanking You PSR

not sure what original is but i did mine in gloss and used polished staino screws

Gloss is best for looks and cleaning, but if you want less gloss, go satin. Matt is harder to keep clean and within a year or 2, you'd swear it was "flat" and untidy looking............much like my Capri!

My rear ones are satin so guessing that's standard, but gloss would look good!
On a side note I'm missing both side interior metal trims for A pillars, if anyone has some spare?
Cheers

whooligan

70GTCapri
My rear ones are satin so guessing that's standard, but gloss would look good!
On a side note I'm missing both side interior metal trims for A pillars, if anyone has some spare?
Cheers

I have several sets. I'm back in Australia on the 1st of February if you want to sent me a PM

Great! Will send a pm
Cheers

Satin.  However my 3000E is wrinkle finish from the factory.  The MK2 Ghia were vinyl (fabric not plastic skin) wrapped and fit on MK1-same with the carpet scuff plates

Thanks guys for info, I think I will keep them gloss at moment and if when installed I prefer Satin (I think r the original colour) I will change them. Not hard to respray. cheers.

P S Robbo
Thanks guys for info, I think I will keep them gloss at moment and if when installed I prefer Satin (I think r the original colour) I will change them. Not hard to respray. cheers.

i like mine in gloss i even cleared them as well with stainless screws looks good