what does anyone run on the injection setup for the throttle linkage?

I need to track something down my bracket is starting to die

are you able to get the old ones anymore?

The bracket on the manifold, or on the throttle shaft???

I have a home fabricated bit on the manifold, and VL Commodore on the shaft.

Shaun

i used a ford laser cable and adapted the part of the laser onto the efi throttle body the cable is not the best fit in the firewall though but i haven't had any dramas

the actual shaft, i've got the proper mount and cable adaptor.

any chance of a photo shaun if you've got one?

next trouble is getting the right length with the pedal travel etc.

Grant,

Here you go, from memory it was from an RB30, nissan or vl commodore.

It should fit straight on, no mods required, just need to use a washer to space it.

I have never paid much attention to a standard setup as mine came bare. I guess they use a circlip attachment of sorts??

Anyway, others may have a different solution, this works fine for me,

Hope it helps,

quote:

---

Originally posted by escortinadriver

Grant,

Here you go, from memory it was from an RB30, nissan or vl commodore.

It should fit straight on, no mods required, just need to use a washer to space it.

I have never paid much attention to a standard setup as mine came bare. I guess they use a circlip attachment of sorts??

Anyway, others may have a different solution, this works fine for me,

Hope it helps,

---

Great, thanks for that will at least put me in the right direction at the wreckers :)