Hi Every one,
 
I am rebuilding my RS and need to see some pictures of the proper way to re-assemble the twin headlight assemblies.  Most importantly whether the main body which is stamped with both LH and RH is orientated looking from the front of the car or as seen from sitting in the drivers seat. I have looked at another set and they are bodgy so any assistance would be appreciated, my workshop manual doesn't show any pictures.  Also does any one know where to get the adjusting screws and plugs for them.  The ones that SMCKA sells are for the Mk 2 headlight bowls and are quite different.
 
Cheers,
 
Len