quote:
Originally posted by nardo
would you be interested in selling? how much?
also what rev region is it in? and what other parts do u have included
Getting followers with a cam is best. some suppliers have different rocking ratio's. this all depends on valve stem lengths.
It will produce power from 3500-6500rpm. mine was a dog under 2500rpm.
I would go for Avon's cam if i needed one.
Remember, it won't need the spray bar anymore being cross drilled.
The oil feed will need blocking off on the side of the center cam post, where the oil rail bolts on.
Oil feeds the cam via a slotted center cam bearing.
It's not straight forward, but worth while if you don't trust the spray bar to feel oil to each cam lobe.