That is sensational. Real credit to ya mate.

wow looks brilliant, nice car and with all the grunt to back it up, credit to you

Looking good Bill, top marks. Very neat, good power at relatively low revs. All round good package and more power to come.

Good work

Woz

utterly stunning. what a fantastic car.

It's certainly come together suberbly [:p]
Well done !

Cheers,
Damion.

most tastefully moded car on the forum...

well done now time to enjoy

Thanks guys

I am going to fix a few issue before registering as there is no rush for me to get it on the road.

I have found out that I need some peugeot handbrake return springs. Right handside was not releasing without the spring.

I will remove the cross member and press out the solid rubbers. Spoke to Burtons last night and a few of their customers have reported bad vibration with a world cup cross members for street so they suggest replacing mounts with Poly 14 Capri M1/Escort Mk1 Leaf Spring Rubbers. The Burtons clients who have done this have reported that it reduced vibration quite well.

Pulling the haltech loom out to run a couple of additional switched 12volt wires to run the VCT and Thermo Fan. I have only just learen't that the PWM ouputs switch to ground.

Need to bleed the front and rear brakes.

Then I will take if for a drive down my street in two weeks and see how those changes work.

Regards

That is AWESOME!!! Remember seeing this with the Pinto then no engine and now these pictures. Great project result.

Michael

mate could i hassle you for some photos of your rear disk conversion,i bought the kit from geoff from eurospeed but haven't fitted yet,just wanted to see how they look and how they mounted.thanks mate

Mr GrumpyMK1
Here are the pictures. Did you get the handbrake return springs? I am finding them hard to find.