Here you go, i think this is extremely close measurement wise
The piece from the lower left to upper right point it 60mm tall if that makes sense, that will give you your angles for the bars mid section.
the cut-outs both measure 27mm at the widest point and 13mm high.
The left side of the bracket is actually angled at about 5 degrees hence the measurement differences from top to bottom on that section plus the shorter bottom run in the middle section.
I just realized that bottom left measurement should read 150mm not 145mm sorry.
Oh look! I found a joint that sells them in the UK!
https://stage1.org.uk/product/rs2000-nose-cone-bumper-brace/ https://stage1.org.uk/product/mk2-escort-rs2000-front-bumper-brackets/ https://stage1.org.uk/product/rs2000-nose-cone-wing-fixing-brackets/ https://stage1.org.uk/product/lower-nose-cone-brackets/
Attached Image(s)
