Hi Guys got a nice set of fibreglass C pillar covers today from the UK sweet.
 
Chris

Some more details please.  Do they have a grain texture finish as OEM or completely smooth? Just black gel-coat or painted? Hard to tell from the pics. Who was your supplier by the way?
thanks,
SFE

SFE
Some more details please.  Do they have a grain texture finish as OEM or completely smooth? Just black gel-coat or painted? Hard to tell from the pics. Who was your supplier by the way?
thanks,
SFE

Do they have a grain texture finish = NO SMOOTH GLASS LIKE FINISH ON TOP AND ROUGH FIBIREGLASS UNDERSIDE. IF YOU HAVE A BLACK INTERIOR YOU WANT EVEN NEED TO PAINT THEM.
 
SUPPLIER =  http://www.mageemotorsport.com/
 
COST $100 POUNDS INCLUDING SHIPPING... SHOULD HAVE GOT A FEW MORE TO SELL VERY NICE ITEM.

I bought a set of these a while ago with the intent of making up the fitting studs on the back to use in street cars. Being motorsport items they are just meant to screw onto the C pillar. Haven't had time due to work but was thinking of getting some sets made up for sale. Nice bit of kit- postage over was a killer.
Len

NQRS
I bought a set of these a while ago with the intent of making up the fitting studs on the back to use in street cars. Being motorsport items they are just meant to screw onto the C pillar. Haven't had time due to work but was thinking of getting some sets made up for sale. Nice bit of kit- postage over was a killer.
Len

Yes postage was 50% of total cost, car at trimmers so when it gets back will add a few photos.
 
Chris

Still thinking of getting some made, trying to get to see fibreglasser today to find out what is involved. Len

Hi All,
Today's burning question- on the back of your C pillar trims- how many plastic mounting pegs - 3 or 4. Seems Pommie ones have 4, my examples have 3 and a small screw hole in the top corner to fix to body. Can anyone confirm visually or diagram from parts manual?
Cheers,
Len

Attached scan from parts book shows "c" pillar trims as part numbers 31112/3 and 6 clips (3 each side) as part number 120254ES. No mention of a screw in the parts list.
Phil

Hey Philh,
 
you have some details on the parts book? that exploded view and others like it would be very handy reference material...
 
//lee

Thanks for that Phil, The screw in the corner might have been added by the previous owner just to make it a bit more secure or to keep it nice and flat against the pillar where it meets the hood lining. The trims were in pretty poor condition. I am making fibreglass ones so should be stiff enough not to need further fixing. I will soon know when the prototype is fitted.
Cheers,
Len