I went back to Yavuz at Uni Group for a health check, we made 263kW atw at 24psi.........Nice to know nearly 6 months later it is performing as expected......

That damper is a neat bit of gear Mark.

What sort of Cams are you looking at ? Are there any plans to improve on the existing manifolds ?

Cheers,
Damion.

There is not much room to move with cams as my pistons are the standard item and the more agressive cams must be combined with scalloped pistons. I don't want to pull the engine down to do this until it needs a freshen up...
There is no rush to change inlet and exhaust manifolds yet. I want to do some port work first, the car is running well right now so I will drive it for for a while and then look at taking the head off to have some work done.

It will be interesting to see how you go. Good to hear that the car is still going strong any way Mark. It is a real credit to you.

260+ rwkws from a totally stock engine on 24psi!!! now thats what im talking about!!
are you going to spec some custom cams or just use a set of BD's???? 10/14/15/16???

quote:

---

Originally posted by tybrown

260+ rwkws from a totally stock engine on 24psi!!! now thats what im talking about!!
are you going to spec some custom cams or just use a set of BD's???? 10/14/15/16???

---

Undecided with cams, but have limited options unless I change the pistons, so there is no rush.

Street Fords #58. Loads of awesome cars in this issue. I found one that looks familiar...

Nice!! Did they give you a prize[%]

quote:

---

Originally posted by Phil

Nice!! Did they give you a prize[%]

---

Never knew there was a contest[?] and there is no need for a prize...[88]

The prize comes when the righthand pedal is pressed...to the floor[%]