Yes on 45's as far as they can go, filling the intake ports and intake manifold made a massive difference on flow.....suprised everyone involved.  Also I have always had aussie made extractors untill this build but ended up going larger uk items this time (about the same price to your door too!)
 
http://www.burtonpower.co...sohc-pinto/ashm05.html
 

Price guide hey........it would be cheaper to buy a sr,  but I wanted to keep it in the family and not fork out for cosworth power

Very nice.
 
What rod and size are they?
 
Cheers
 
Matt

Extractors look the same as mine. What cam are you using?

Mac

Price guide hey........it would be cheaper to buy a sr,  but I wanted to keep it in the family and not fork out for cosworth power

 
Respect
 

Specs are;
cam is 252 deg in/254 deg ex
rods 5.530"
Pistons 1.145
All are custom

solid

Sorry its been such a long time, haven't had time with family stuff and been working on other peoples cars.....so pulled the old engine out last night and will putting the new one in after easter, will post some pics/video then.

Hey all, finally installed the new engine/msd street fire/coil/recon radiator and thermo fan.... but ran into a few dramas.....
-My new extractors required me to remove my brake booster/ master cylinder assy. to fit it and they are just touching the top of the drivers side engine mount(metal).  Has anyone had this issue before? I am going to have to go an aftermarket pedal box of some kind. 
-Noticed my passenger side engine mount is broken.
-Also noticed by altenator bracker is cracked
-Went to install the new fuel line (3/8") from the tank forward and a new electric fuel pump, undid the fuel line at the bottom of the tank and no fuel came out, lowered the car and the hoist and the checked the tank. Only to find its 1/4 full.  The car has been "marinating" for a few years, so i reamed out the outlet of the tank and there was some quite disturbing fluid in the tank (mostly a rusty red color) but some pretty serious sludge in the bottom YAY... 
So all in all a very productive day by was thinking at the start of the day I'd be able to take it for a spin at the end...... Oh well
Will chuck some pics up tomorrow