Want to flock my fibreglass twin cowl dash. Anybody know how much this costs? Any of the Adelaide boys know where in Adelaide is good??

(Got a rough price from Grant Austin Packaging of over $400!!!!!!!!!!!!!!!!!!!!)

Should be $90 min charge for that as I got a sierra one done for that.

These guys do all of Holdens and toyotas work so are spot on.

Flock Finishers Australia

Address:
12 Swift Way

Dandenong VIC 3175
Phone:
(03) 9706 6678
Fax:
(03) 9706 6471

Have not found any Adelaide flockers so I bought a flocking kit off flocking eBay. Not sure how it will go but will test scrap material first.

well flock me .... flock me dead .... aw just flock off


sorry just had to do it ... I know it doesnt help ya much .. heh heh heh[88][88][88]

We bought a flocking kit off a UK company called Frost over the web, about $50 or so, Came out pretty wall as we were covering a cracked mk2 dash pad. I'll post some photos, cheers Ted

Bought mine from here;

http://www.timbecon.com.au/products/flocking-439_0.aspx

I did mine and also bought it from timbecon its pretty easy to do. i also did a few coats. it also works better is you seal it first with some clear varnish and i just used a metal flour sieve the spread the fiber. also make sure you do it over a drop sheet so you can collect what had not stuck so you can re-use them.

http://classic-ford.org/forum/topic.asp?TOPIC_ID=18986

what's the feel of the dash top like after flocking? Is it soft and velvety or does the adhesive make it rough??

if tou do one coat it is sopt if you do two it gets roughter