2012/08/09 10:05:52
ratta tat tat
It says here the GT40 is 3ohm resistance. Are they okay to use with accuspark ignition? I read somewhere on here that some coils will wear out the accuspark quickly if the coil resistance isn't right.
 
http://datsun1200.com/modules/mediawiki/index.php?title=Ignition_Coil
2012/08/09 13:32:09
Matt75
From the Accuspark website - http://www.accuspark.co.uk/faqs.html#q4
 
I want to fit a AccuSpark. Does it matter if I have a standard or ballast coil?
 
The AccuSpark will work with both Standard or Ballast coils. But requires a Ohms resistance of not less than 1.4 Ohms. If the resistance falls below this it will cause the unit to run hot and reduce overall life.
 
Matt
2012/08/09 15:44:55
ratta tat tat
Thanks Matt.
2012/08/10 13:19:23
Power_Quest
I haven't had any problem with my set up using the gt40 and accuspark but I have only done 3000km on the plugs so far
2012/08/16 05:12:23
Robmk2
I just picked up the blue 1.5ohm coil from accuspark for $30AUD delivered, took about 2 weeks. I was also using bosch GT40R and wanted the accuspark setup to last longer... No noticable difference in performance so far...
 
Cheers,
 
Rob

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account