2018/07/24 15:48:30
Benny
Hi, 
 
Just fitting a GT 6 Dial gauge cluster into a standard 1600 4cyl 2x dials car,  cannot work out the volt gauge wiring, or perhaps I have a dead gauge, ran a wire of rear positive alternator, nothing worked?.
 
Any ideas.
 
Thanks  Ben.
2019/11/21 08:06:17
BEE VEE
Have you checked EARTH is A.OK ?........... Pref with an ohms meter ?
2019/11/21 22:03:14
gtv6capri
get a wiring diagram and look at what feeds you need, most manuals show Deluxe vs GT / XL.  There is a regulator in the back of a GT dash, not sure if the deluxe has this 
2019/11/23 23:55:37
BEE VEE
Also check suspect  Guage on its own direct to a known good battery out and away from car's circuitry.
Both test wires must first be hard wired to pos a neg of Guage and one end to battery post. Use remaining 4th end as on off switch to 2nd battery post.
 
 

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account