looking fo a tough 2.0l for my mk2 speedway car im in qld and will travel to get, my std engine just cant keep up anymore.
cheers

What are you looking at spending and what were you after as i have a couple of different options depending on the dollars

mainly just engine as my bolt ons are a bit diff, i run a falcon alt, etc, i have a custom made manifold running a holley, but i would like to get hold of a electronic dizzy, just the 2 wire type. what have you got? pm me with details/prices. cheers

Repco sell a fireball electronic ignition kit for under $200
I have some Pinto bits n pieces available.

Hi

for what you are after i have a motor that was built not long ago
oversized pistons valves ect
not fitted and filled to the buggery with oil so you will need to change it and run in the motor plus extensive head work
$1600
with your bolt ons

location? to get engine?
what bits have you got MAXRS?
go fast bits? would mind maybe twin webbers.
EFI?

Hi Spudsc26.
I have a Pinto that has run a 15.7 1/4 mile.
1mm oversize pistons, worked head, large valves, big cam.
Head is off for inspection. full Felpro gasket set with it.

Mild Pinto engine(220km)can hear running with twin Dellortos.
Also have 38/38 V6 Capri carb on a std ported inlet.

I would stick with the 500 Holley. i have had success with them on Pinto engines. except with motorkana's. the carbs don't like turning left.

Porting the standard inlet manifold, and match port it to the head is worth the effort.

Click on the username to see posters details and link to PM.
Mark

pm sent cheers.

Hi

spud im in Sydney where are you
i have a wide range of go fast bits
what were you after
side draught down draught webers and manifold
holley set up
or efi
also sierra five speeds
and a super charger and turbo set up
but again
what type of dollars were you lookinga t spending and then what about your diff
i have a drum and disc set up
so where are you located and when did you want to take a look