fitted my WCXM today. just wondering if its sitting correctly.
on the rh side (passenger) it sticks out a fair bit



the left hand side the lip sits flat against the chassis rail. is this normal?



cheers

g'day Krt, I dont have an answer but i was just wondering what's the difference from a normal X-Member to a WCXM?

much better mounting system. supports the motor better and somewhat quick release being just one mount bolt on either side which is accessible ( more so than standard)

i just had a look at my crossmember, (standard)

mine sits about 2-3 mm out on the p/s

and easily over 5mm on the d/s

im not much help am i? [:o)]

I think this is normal.

The drivers side has an additional stregthening plate (my mk2 RS2000 does) which is missing from the passenger side. Also make sure you have a packer on the passenger side between the WCXM and the chassis to replicate the missing plate found on the drivers side.

I don't think the 1600 XM has the packing.

Cheers

yeah my standard one on the daily sits out on the passenger side too.

im just curious