2012/10/18 21:19:35
mattsmithadelaide
Hey guys just started taking apart my pinto engine because it had no compression. It has an ep28 cam in it
Am I going to expect it to be a pig to drive around town as it says racing only?
And how much extra power should we expect?
2012/10/18 21:26:23
Wozzah
mattsmithadelaide

Hey guys just started taking apart my pinto engine because it had no compression. It has an ep28 cam in it
Am I going to expect it to be a pig to drive around town as it says racing only?
And how much extra power should we expect?

 
Are you sure it's an EP28, as that engle cam is a V6 cam, not a Pinto cam.  Sure you'e not looking at the "EP" cast mark which is common to Pitno billets no matter what the grind is?
 
Cheers
Woz
2012/10/18 22:48:00
mattsmithadelaide
Had another look only marking on it is ep26 and made in USA
2012/10/18 23:06:35
2lt_Scort
Matt,
 
Have a look on the back end of cam. ID marks are stamped in the end facing heater bubble.
 
Rhys
2012/10/18 23:07:03
Wozzah
mattsmithadelaide

Had another look only marking on it is ep26 and made in USA

 
That is just a cast number.  You need to look on the back or front of the cam and see if anything is stamped in either end.  EP26 billets are everywhere.  Could be anything
 
Cheers
Woz
2012/10/18 23:17:52
mattsmithadelaide
Excuse my ignorance haha. I shall have another look tomorrow thanks!

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account