Hey if you require any bits for your Pinto ...Cams, big valve heads(2), 1 stock but skimmed 0.060th(1.5mm)head, new bearings, new pistons +1mm,s/h blocks STD bore, bottom ends(short motor) +0.5mm, +1.0mm bore. S/H Clutches, sumps, flywheels, dizzys. Most have been in my shed between 6 to 15yrs! I can post some lighter items but heads/blocks etc are p/up only. contact thru email plz. I just want my shed back!!!!!

any chance you got any spare 60thou over pistons even if it's not a full set ??
cheers

Hi, interested in some parts. PM sent, cheers
Dave

quote:

---

Originally posted by joeyjonsey

any chance you got any spare 60thou over pistons even if it's not a full set ??
cheers

---

Only have new 40thou set of Federal Mogul's in box c/w ring & pins $200. Ive the 60thou block but pistons went in a mates rebuild..Doh!

Found another engine....a 2.8i Cologne V6 from a '86 XR4i Sierra i bought in 1992, been on a stand ever since, comes with all pulleys, some injection, flywheel, 2x clutches, 2x bellhousings & a 4speed box to suit. $850 ono

Got any 2lt escort sumps and pickups?

I got a p/up pipe, possibly have a sump but its condition aint good. Unless you want a whole bottom end with the sump? $80

got any decent clutches for a pinto. needs to be fairly strong as i want it for a pinto turbo setup.

can p/up im in plympton

cheers Glenn

I need a pinto sump to suit a MK1 escort, what have you got?

Originally posted by sundowner

got any decent clutches for a pinto. needs to be fairly strong as i want it for a pinto turbo setup.

can p/up im in plympton

cheers Glenn

Hi Glenn, only have stock clutch[B)]


Jet6, i'm all out of Escort sumps now, only TC-TF Cortina left(x3), they fit but are very close to the x/member