2011/01/17 21:58:07
pottergt
Hi Guys

I have 3 only old school minilites / contessa's that I think are 13 x 6 inch with about 120 mm from the hub to inside the back of the rim

I know they are not the best rims but want to finish the set ,I still need to find 1 more , can anyone help with 1 only rim ?

I am in SA


Cheers Craig

2011/01/18 07:47:58
shaunb
If they are the 13 x 6 rims that are common out here (but not superlights), they are probably Contessas.

You can try Steve (Mk1RS2000) on the rsm site as I know he had some of these. You are most likely going to have to buy a set and be happy to have extra spares.

If they are the factory 2 piece rim (I think they were 5's or maybe 5.5's), they are just the factory sport mag, not much chop, good for hanging hoses on in the garden.

Post a pic and I am sure you will get a correct ID.

Cheers

Shaun B
2011/01/18 18:49:48
pottergt
Hi , managed to load a pic up

Cheers for the reply Shaun

2011/01/18 19:29:43
Gdub

I just sold a set of 4 and a set of 3 13x6 contessa's on ebay a few months ago.

Bad timing ...
2011/01/18 22:10:24
shaunb
OK thats not a contessa, its one of those dreaded factory things.

2 piece, steel rim welded to an alloy centre. From memory, even heavier than a standard steel rim.

If you own anything faster than a 1100 cc pushrod escort with a single downdraft stromberg.......I would choose another wheel.

They were an option on GT1300 (and probably Aussie Twin Cams as well as Capris.

I have seen these for $50 to $80 for a set at swaps, might be worth putting a set aside if your car was optioned with them (for when you sell the car).

If you must have minilite style rims I would seriously go for either Contessas or Superlights (both have better offsets and will look heaps better on nearly anything with a Ford badge.

There are plenty of good looking period rims for small fords, Rostyle's?, pommy RS alloys (2 sets on ebay at mo), Globe Bathursts, I could go on.......

Cheers

Shaun B




2011/01/20 22:53:01
Jaycees
I have several of these steel & alloy rims in 5.5in but am in Sydney 0245773011 Jim
2011/01/21 21:08:29
pottergt
Hi Jim , PM sent Cheers Craig
2011/04/26 21:37:44
pottergt
Thanks guys , I was hoping to put them on a MK 1 cortina but from the feedback so far might be less than favorable !
2011/04/26 21:40:37
pottergt
quote:
Originally posted by pottergt

Thanks guys , I was hoping to put them on a MK 1 cortina but from the feedback so far might be less than favorable !

Jim , thanks for the info , I need to measure the rims to get back to you


© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Use My Social Media Account