hi guys ive got rust in the rear scuttle on the drivers side next to the vent, was wonder if anyone knows where to souce this panel any help would be great cheers luke

Add a pic mate so we can see which piece you need.

is it the upper or lower panel both are at but be warned the lower one just cost me $500 to get here but its a complicated panel I wasnt about to try and make it and the upper one is even more and the cutout flutes have to be done (they are just pressed) they do the ends of the upper just to the first vent for cheaper, but if the rust is already in there its the whole panel job
 

Yeah Steven that's that's the piece,the top one with the vents who you get it through ?

Its from   the panel is listed as E1F 18A its 222 UK pound ($450 A) and will probably set you back $250 to ship. They do the ends up to the first vent for 88 Pounds each, (cheaper frieght) If the top one has gone you will probably find the bottom one is gone too. it may pay you to cut one from a forum scrapper. the ex-pressed panel only has the vents pressed not cut out probably a good idea to leave them that way so the water does not run into the boot.