Look what was waiting for me when i got home last nite...



KC224 high torque cam kit - 1000 - 6500 rpm



adjustable cam gear (double chain)



all together... *evil grin*

got a bit of a bonus from work - so need to get the last few bits to the puzzle..

- linkage for the single 45 dhla...
- she's running a bit rich at the moment, and fiddling about i find i need more spark, so a proquip ignitor module is on the cards...
- still on the market for some 2nd hand 15"s and new tyres...
- need some odd's and sodds (needles / chokes etc) for refit of the carb...

then (for now) should have all i need to move the granny mobile a little faster... :)

quote:

---

Originally posted by cjdeane10

got a bit of a bonus from work - so need to get the last few bits to the puzzle..

- linkage for the single 45 dhla...
- she's running a bit rich at the moment, and fiddling about i find i need more spark, so a proquip ignitor module is on the cards...
- still on the market for some 2nd hand 15"s and new tyres...
- need some odd's and sodds (needles / chokes etc) for refit of the carb...

then (for now) should have all i need to move the granny mobile a little faster... :)

---

Try the wanted section if your looking for parts.

The fun starts now. Good luck with it.

got these Today!







Tyres are brand new 195/ 50 / r15 and are correct 4 x 108 stud pattern...

fit fine, only drama is that the current original studs are too short... and need some tapered nuts to fit...

Not bad for $350 tho! [88]

[(#)]Ordered some longer studs for the new rims...

14mm spline, and 65mm for the front.
13mm spline, and 65mm for the back.

once they arrive, i will head to repco to get some nuts to suit.

i was going to take them to my mechanic mate and use the hydraulic press to seat them.

Any guideance on how to fit these on the Mk2? or should i take it to a 'professional' and have them fit them?

also ordered all the other bits of jets, linkages, etc to finish off the carby re-build...

taking my time to make sure everything is sorted - but when i look in the shed at all the bits it makes me anxious to chuck them on! [:x)]

still waiting on some bits to arrive - so no news...

i did get my linkage kit from Eurocarb for my single DHLA and it has two cables... anyone used this sort of linkage before?

LOL - was given a scoop... low, hornet style...





not quite sold on fitting it yet, but may fit it when i get her painted...

p.s. also got the wheel studs today - will hopefully fit it ths week..

Ok,

2L radiator fitted yesterday, as well as longer wheel studs (SMCKA) and nuts (NICE from coventry's). Reverse switch is in, and reverse lights work again!

Studs were a little tight to press in, but used the hydraulic press on all of them, and went in ok.

Putting some more air in the tyres, and then will fit them after work today - pics coming soon.

Looking good. Should be nice when it's all bolted together.

DO NOT PUT THAT SCOOP ON! please =P
Im sorry but a guy around my area has a red Mk2 with a hornet scoop and he pulled up next to me one morning. I took one look at it and piss myself laughing and missing the green light =P Unless you need it (top mount inter cooler its stupid) just my opinion tho.