Dose anyone that owns a 2.0 pinto able to tell me which way the heater hoses go. Is there a metal pipe next to the block exhaust side, some pictures would be great
many thanks
Norris

There is no pipe.

There is a shaped hose that goes from the water pump to one side of the heater core (Doesnt matter which one) and then another shaped hose goes from the other heater core outlet over the top of the rocker cover to the choke mechanism on the carby (assuming you have a 32/36) then the last one goes from the choke mechanism to the inlet manifold.

Gates still make all the shaped hoses so you ca get them from Autobarn or Repco.

thanks for that Gdub im running a 45 side draught so it will be a little diffrent i should be able to run 2 hose's too and frow from the waterpump and it should work on my water pump there a threaded plug i assume a small galv pipe threaded in and a bent to suit should work nicely
regards Norris