302esky

mat what i have is a xb m/c bolted straight to the firewall and then ran brake lines to rear boot and fitted two brake boosters one for the front disc and one for the rear, the boosters run different pressures i think front was 1200psi and rear was 900psi and i dont have any problems except hitting my head on the windscreen

 
Hi mate,would you be able to tell me which vh series boosters you are running in the boot, im in the process of doing the same thing atm.
 
cheers'

Might be a idea to fit a bias tap to the rear brakes, they cost about $60 and reduce from 100% down to 30%, Wilwood, Tilton etc

Hi Matty,
 
I am running Focus calipers for my rear brakes and have a M/C from a Mazda 626. It's a 1" bore but has only 2 outlets, I will have to use a T junction for the other connection.  Mounting holes only had to be taken out slightly for it to bolt straight on.
 
Cheers,
 
Len