All figures are at the wheels in Killer Wasps
N/A = normally aspirated.

1. Nathan Chapman - Turbocharged Mk1 Escort - 180.9kW
2. Kurt Harmer - Turbocharged Mk2 Escort - 147.1kW
3. Jon Tarr - Turbocharged Mk2 Capri - 132.7kW
4. Matt N - N/A Mk2 Escort - 118.5kW
5. Danny Mischok - N/A MK2 Escort - 115.6kW
6. Doug - N/A MK2 RS2000 - 96.2kW
7. Ben Shields - Supercharged MK1 Escort - 95.7kW
8. Rhys Munro - N/A Mk2 Escort - 95.6kW
9. Nathan Coote - N/A Mk2 RS2000 - 94.8kW
10. Glenn S|ender - N/A MK2 RS2000 - 94.0kW
11. Steve (RS027) - N/A Mk2 RS2000 - 93.7kW
12. Sean Stewart - N/A MK2 RS2000 - 86.7kW
13. Rusell Munro - N/A MK2 RS2000 - 83.1kW
14. Glenn Evans - N/A MK1 Escort - 81.1kW
15. Steve Pfeiffer - N/A Mk2 RS2000 - 80.3kW
16. James Rudd - N/A Mk2 RS2000 - 78.0kW
17. Callum - N/A Mk2 Escort - 77.9kW
18. Rhys Hillman - N/A Mk2 RS2000 - 75.4kW
19. Michael (Mr Mk2) - N/A 1.6L Pinto Mk2 Escort - 75.3kW
20. Reece Gomba - N/A Mk2 RS2000 - 74.1kW
21. Simon (nismo_capri) - N/A Mk1 Escort - 69.92kW
22. Avon McIntyre - N/A Mk2 RS2000 - 66.1kW
23. Jason O'Halloran - N/A Mk1 Cortina - 59.6kW
24. STOCK STANDARD - MK2 Escort - 49.0kW

Any help on what mods people are running to reach around the 90rwkw mark? dont want to change to injection either. Also anyone dynoed just a 4spd pinto with extractors and 2 1/4in exhaust?

I'm coming Rhys...

The Other Half

I'm coming Rhys...

Go for it mate!
That engine is currently retired on a engine stand and the other motor I built is over 90kw mark atm but I hope to get slightly closer to 100kw mark as its currently pulling peak power to early based on cam specs.
All this sounds quite amusing when some are pushing 200kws in their Escorts 
 
Rhys
 

i cant wait to challenge you nathan... 
rhys i think has something up his sleeve that looks like a snail
 

Can we get some torque figures next to the HP?

N/A for me is just fine for the moment. I'll get it dynoed again in the next few months to see how the new changes have taken affect.

ratta tat tat

Can we get some torque figures next to the HP?

Waste of time when measuring at the wheels
 
Woz

Hope to have something to add by the end of the week. After 7 years looking at a dead Pinto lump, I can't wait!
 
New Paul T/Mk1 Lotus built engine due on Unigroup dyno Wednesday.

Hey cam, best of luck on Wednesday. Will it be on the rollers or engine dyno?